Level measurement

Continuous level measurement and level limit detection in liquids and bulk solids
Plant safety, product quality, process optimization and environmental safety are key factors for every process measuring point.
Wide range of applications: from chemical, petrochemical, food and pharmaceutical industry, where hygienic re-quirements are most important, to power and oil industry, where robust and reliable devices are required, that can withstand extreme operating conditions.
Continuous investment in research and development enables production of new devices that can be easily integrated in modern system of automation.
50 years of experience in domain of level measurement.
All devices are tested and certificated.

Continuous level measurement

For all types of medium
For all industries
Different possibilities of instruments
All certificates and licensees

Universal solution for level measurement of all kinds of liquids and bulk solids.
Operating temperature range up to 450 °C, and pressure range up to 500 bar.
Backed up by 50 years of experience: over 3,000,000 units successfully measuring in all branches of industry worldwide. Long-time experience resulted in high reliability and universal applicability of capacitive level measuring systems.
Interface measurement independent of emulsion layer.
Capacitive level measuring principle depends on relative dielectric constant of the measuring medium.

Contactless method for all kinds of fluids and bulk solids, for corrosive and abrasive mediums.
Flow measurement in open channels
Operating temperature range up to 150 °C, pressure range up to 4 bar.
Wide range of sensors for different applications.

Non-contact level measurement for extreme operating conditions, for aggressive media. Not affected by changing media, temperature changes, gas blankets or vapors.
Operating temperature range is up to 400 °C, and pressure range is up to 160 bar.
System measures the time between transmission and reception, which is directly proportional to the distance be-tween the antenna and the product surface.
It’s about high precision and reliable measurement method.
Temperature and pressure changes have no effect on measurement.
This measuring method depends on relative dielectric constant of measuring medium.

Contactless method for all kinds of fluids and bulk solids, for corrosive and abrasive mediums.
Reliable level measurement.
Measurements are independent of medium.
Operating temperature range up to 400 °C, pressure range up to 400 bar.
System measures the time between transmission and reception, which is directly proportional to the distance be-tween the sensor and the product surface.

Hydrostatic pressure measuring cell is optimized for level measurement.
Designed for continuous level measurement of liquids and pastes in the chemical, pharmaceutical and foodstuffs industries as well as in water and wastewater treatment.
Operating temperature range is up to 100 °C, and pressure range is up to 40 bar.
Integrated over-voltage protection ant pt100 temperature sensor.
Available with drinking water approvals and food industry.

Non-invasive and non-contact measurement from the outside of the process vessel.
Applicable under extreme measuring conditions, e.g. high pressure, high temperature, corrosion, toxicity, abrasion.
Measurement independent of process temperature and pressure.
There isn’t possibility of environmental contamination.
Highest availability, reliability and safety, even for extreme process and ambient conditions, when it is not possible to use other measuring methods.

Measuring principle based on vertical movement of the weight and detection of the moment when weight touches the product surface.
Checked, tested and reliable measurement of solids up to 70m.
Operating temperature range is up to 150 °C, and pressure range is up to 2 bar.
Construction of measuring system is modular.

For all types of medium
For all industries
Different possibilities of instruments
All certificates and licensees

Universal solution for level limits detection of all kinds of liquids and bulk solids. The wide selection of corrosion-resistant materials used ensures that it can also withstand extremely corrosive products.
Operating temperature range up to 450 °C, and pressure range up to 500 bar.
Backed up by 50 years’ experience: over 3.000.000 units successfully measuring in all branches of industry worldwide. Long-time experience resulted in high reliability and universal applicability of capacitive level measuring systems.
Capacitive level detection principle depends on relative dielectric constant of the measuring medium.

Simple and cost-effective method of level limits detection.
Applicable for level limit detection of electrical conductive liquids like water, wastewater, liquid food, etc.
Operating temperature range is up to 250 °C, and pressure range is up to 160 bar.
There is the wide range of compact and cost-effective devices for high pressure and high temperature applications, and also for hazardous areas.

Non-invasive and non-contact measurement from the outside of the process vessel.
Applicable under extreme measuring conditions, e.g. high pressure, high temperature, corrosion, toxicity, abrasion.
Measurement independent of process temperature and pressure.
There isn’t possibility of environmental contamination.
Highest availability, reliability and safety, even for extreme process and ambient conditions, when it is not possible to use other measuring methods.

Operational safety and reliable level limit switch for all kind of fluids and fine-grained and powdery solids, not affected by flow, turbulence, bubbles, foam, vibration or build-up.
No calibration and no maintenance needed.
Operating independent of electrical characteristics of medium since it is based on the tuning fork measuring principle.
Operating temperature range is up to 280 °C for liquids, 150 °C for solids, and pressure range is up to 64 bar for liquids, up to 25 bar for solids.

Electromechanical system for level limits detection based on rotating paddle switch.
Economical and reliable solution for level limits detection of powdery and grained solids, max. grain size 50mm and density 100 g/l.
Operating temperature range is up to 80 °C for liquids.
Operating pressure – atmospheric.
In case of vertical mounting from the top of the silo, maximal measuring height is 2m – rope version.